Juniper Networks SRX 210 Instrukcja Użytkownika Pobierz pdf (Strona 106)

NOTE: After the power supply is turned on, it can take up to 60 seconds for status

indicators—such as the Status and Power LEDs—to show that the power supply is

functioning normally.

NOTE: It is recommended to issue the CLI command request system power-off when

you want to power off the device immediately after the device is powered on.

Powering Off the SRX210 Services Gateway

You can power off the services gateway in one of the following ways:

■ Graceful shutdown — Press and release the Power button. The device begins

gracefully shutting down the operating system and then powers itself off.

■ Immediate shutdown — Press the Power button and hold it for more than ten

seconds. The device immediately powers itself off without shutting down the

operating system.

NOTE: Do not press the Power button while the device is shutting down.

WARNING: Use the graceful shutdown method to halt, power off, or reboot the

services gateway. Use the immediate shutdown method as a last resort to recover

the services gateway if the services gateway operating system is not responding to

the graceful shutdown method.

CAUTION: Immediate shutdown can result in data loss and corruption of the file

system.

86 ■ Powering Off the SRX210 Services Gateway

SRX210 Services Gateway Hardware Guide

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 199 200

Brak uwag

Juniper Networks SRX 210 Instrukcja Użytkownika Strona 106