Juniper-networks M7I Instrukcja Użytkownika Pobierz pdf (Strona 81)

You can install any transceiver supported by the PIC.

•

Fiber-optic small form-factor pluggable (SFP) transceivers:

•

Duplex LC/PC connector (Rx and Tx)

•

1000Base-LH (model number: SFP-1GE-LH)

•

1000Base-LX (model number: SFP-1GE-LX)

•

1000Base-SX (model number: SFP-1GE-SX)

•

Copper SFP transceiver:

•

Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45

connector

•

Pinout: MDI crossover

•

Length: 328 ft (100 m)

•

1000Base-T (model number: SFP-1-GE-T)

•

Copper interface specifications—see Gigabit Ethernet 1000BASE Optical Interface

Specifications

NOTE: Do not install SONET/SDH SFPs in the Gigabit Ethernet port. The port will not recognize

the SFP.

Cables and connectors

OK LED, one tricolor:

•

Off—PIC is offline and it is safe to remove it from the router.

•

Green—PIC is operating normally.

•

Yellow—PIC is initializing.

•

Red—PIC has an error or failure.

APP LED, one bicolor:

•

Off—Monitoring application is not running.

•

Green—Monitoring application is running under acceptable load.

Port LEDs, one per port:

•

Off—Port is not enabled.

•

Green—Port is online with no alarms or failures.

LEDs

Documentation

M7i PICs Description on page 3•

• M7i PICs Supported on page 4

• M7i PIC/CFEB Compatibility on page 11

• Gigabit Ethernet 1000BASE Optical Interface Specifications

Gigabit Ethernet IQ2 PIC with SFP (M7i Router)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 104 105

Komentarze do niniejszej Instrukcji

Brak uwag

Juniper-networks M7I Instrukcja Użytkownika Strona 81

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Juniper-networks M7I