Juniper-networks SRX 210 Instrukcja Użytkownika Strona 29

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 176
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 28
Table 8: SRX210 Services Gateway Built-In Hardware
Interfaces (continued)
DescriptionSpecificationsInterface Type
The console port can be used
as follows:
To provide the console
interface
To function as a
management port to log
into a device directly
To configure the device
using the CLI
Consists of one port
Uses an RJ-45 serial cable
connector
Supports the RS-232
(EIA-232) standard
Console
The Mini-PIM slot can be used
to provide LAN and WAN
functionality along with
connectivity to various media
types.
For more information about
the supported Mini-PIMs, see
the SRX Series Services
Gateways for the Branch
Physical Interface Modules
Hardware Guide.
Consists of one slot for a
Mini-PIM
Mini-Physical Interface Module
(Mini-PIM)
NOTE: We strongly recommend that only transceivers provided by Juniper
Networks be used on an SRX210 Services Gateway. We cannot guarantee
that the interface module will operate correctly if third-party transceivers
are used. Contact Juniper Networks for the correct transceiver part number
for your device.
Related
Documentation
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9
SRX210 Services Gateway LEDs on page 13
SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 17
SRX210 Services Gateway Cooling System on page 18
SRX210 Services Gateway Power Supply on page 19
SRX210 Services Gateway LEDs
This topic includes the following sections:
Front Panel LEDs on page 14
Ethernet Port LEDs on page 15
13Copyright © 2013, Juniper Networks, Inc.
Chapter 2: SRX210 Services Gateway Hardware Components and Specifications
Przeglądanie stron 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 175 176

Komentarze do niniejszej Instrukcji

Brak uwag