Juniper Networks 200 Series Instrukcja Użytkownika Pobierz pdf (Strona 19)

Connecting the NetScreen-200 Device to Other Devices

NetScreen-200 Series 13

CONNECTING THE NETSCREEN-200 DEVICE TO OTHER

EVICES

To connect the device, use the ethernet interfaces (ethernet1 through ethernet4 on the

NetScreen-204, or ethernet1 through ethernet8 on the NetScreen-208). The purpose of

each interface depends upon the security zone to which it is bound.

By default, the zone and interface bindings are as follows:

• ethernet1 is bound to the Trust security zone by default.

Connect this interface using a twisted pair cable with RJ-45 connectors.

• ethernet2 is bound to the DMZ security zone by default.

Connect this interface using a twisted pair cable with RJ-45 connectors.

• ethernet3 is bound to the Untrust security zone by default.

Connect this interface using a twisted pair cable with RJ-45 connectors.

• ethernet4 through ethernet8: Can be connected as required.

The default IP address of each ethernet interface is 0.0.0.0/0.

For information on interfaces and security zones, see “The NetScreen-200 Series Device

Interfaces” on page 17.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Brak uwag

Juniper Networks 200 Series Instrukcja Użytkownika Strona 19